The Brainboxes PCMCIA cards are supported in Windows 98, 2000 & XP, with limited support in NT. The cards are not supported in DOS. Please follow these steps:

  1. Uninstall the current drivers by using the Uninstall application from the latest drivers folder and then reboot your PC. 
  2. Download the latest Serial Solutions drivers from the website.
  3. Reboot the machine and insert the card. 
  4. Follow the relevant instructions in the User Guide for PCMCIA cards to install your card. 

To install a PCMCIA card in NT: The PCMCIA serial cards use Microsoft's own serial driver, and will only install as COM1 or COM2 - one of these will need to be free to install the card.

  1. Insert the card into a free PCMCIA slot 
  2. To check that the card has installed, click on 'PC Card' in Control Panel. 
  3. Clicking on 'Properties' displays the COM port number. Note: 2 port PCMCIA cards not supported in Windows NT and PM-120 is Full-Duplex mode only

 

You didn't find answer to your question?

Contact us >>

This FAQ Applies to the following Brainboxes Product Ranges: